Mytek-digital Private-Q DL Cable Assembly Using Canare MR202-16A Manuale Utente Scaricare il pdf (Pagina 4)

7. Separate the 3 wires and place clear 1/32 inch diameter clear

heatshrink on the bare ground wire. To cut the proper length slide

the clear heatshrink all the way on to the wire, then place the

cutters so that it leaves ~1/8 inch of wire at the end. Hold the

cutters place, lift the clear tube free from the wire, then cut.

8. Slide the piece of black heatshrink over the 3 wires and the clear

heatshrink and shrink it with a heatgun.

1 2 3 4 5 6 7 8 9 ... 16 17

Nessun commento

Mytek-digital Private-Q DL Cable Assembly Using Canare MR202-16A Manuale Utente Pagina 4